contact us
0755-29555842
Details
Home > News > Details
Function introduction of intelligent temperature control axial flow fan
Date：2020/5/9 Views：2025 【BACK】
Intelligent temperature-controlled axial flow fan is the fan speed is controlled by temperature, different temperature can correspond to different speed, when choosing intelligent temperature-controlled axial flow fan, you can set the upper limit and the lower limit temperature, below the set lower limit temperature, the Fan will run at a minimum speed. The Fan comes with CS, IR, CL, NTC (temperature sensor) . The NTC is contained in the fan. The TPWM follows an additional bar code such as T164020100a 500, "T" means temperature speed, 164020100 means 1000 PRM when the fan is at 16 °C, and 5000 RPM when the fan is at 40 °C. Note: For the safety of customer equipment, if the temperature sensor is open or short-circuited, the fan is running at full speed. The above is the intelligent temperature control axial fan introduced by Dong Xingyue. A good axial fan is very important. It can not only make the equipment run normally, but also prolong its service life and increase its working efficiency, if you want to know more about axial flow fan knowledge can pay attention to us.
| UP： |
| 下一條： |
